One of Hottest for Gouging Rod 8mm - Manufacturer Supply High Quality RP HP Shp UHP Graphite Electrode for Arc Furnace 8 Inch – 28 Inch – Juchun

One of Hottest for Gouging Rod 8mm - Manufacturer Supply High Quality RP HP Shp UHP Graphite Electrode for Arc Furnace 8 Inch – 28 Inch – Juchun

Short Description:


Product Detail

FAQ

Product Tags

Related Video

Feedback (2)

We normally follow the basic principle "Quality Initial, Prestige Supreme". We've been fully committed to offering our consumers with competitively priced good quality merchandise, prompt delivery and professional support for Clay For Graphite Crucible, Silicon Carbide, Graphite Electrode Joint Bolt, For more info, be sure to call us as shortly as possible!
One of Hottest for Gouging Rod 8mm - Manufacturer Supply High Quality RP HP Shp UHP Graphite Electrode for Arc Furnace 8 Inch – 28 Inch – Juchun Detail:

Graphite electrode is made of high-quality low ash materials, such as petroleum coke, needle coke and coal pitch. after calcining, burdening, kneading, forming, baking and pressure impregnation, graphitizationand then precision machined with professional CNC machining. such of the products own characteristics withlow resistivity, good electrical conductivity, low ash, compact structure, good anti oxidation and high mechanical strength, so it is the best conductive material for electric arc furnace and smelting furnace. 

According to its quality indicators, graphite electrodes can be divided into RP graphite electrodes, HP graphite electrodes and UHP graphite electrodes.

packing and shipping

The graphite electrode is packed in wooden frame, the graphite electrode and nipple are connected, lined with waterproof and dustproof plastic sheeting, the external steel belt is fastened, beautifully and firm, suitable for land transportation, railway and sea transportation.

Instructions
1, wet electrode, use before drying.
2. Remove the foam protection cap on the spare electrode hole and check the integrity of the thread inside the electrode hole.
3, compressed air oil and water cleaning standby electrode surface and the internal threads of the hole; avoid using steel wire group or metal brush cleaning cloth.
4. Carefully turn the connector into one of the electrodes in the spare electrode (not recommended to be mounted directly on the furnace to replace the electrode) and shall not impact the thread.
5. The electrode sling (graphite spreader is recommended) is screwed into the electrode hole at the other end of the standby electrode.
6, lifting the electrode, the electrode to the standby pad fluffer joint end, to prevent the ground damage joints; rings with a hook into the spreader after lifting, lifting the electrode to smooth, prevent the electrode from B and other loose or fixed device collision.
7, the electrode to be connected to standby hanging above the electrode, electrode alignment hole slowly after falling; rotating standby electrode, the spiral hook electrode together with rotation in two decline; the electrode surface is 10-20mm, again with the compressed air cleaning electrode two and exposed part of the joint end; at last completely decentralized electrode. Not too hard, otherwise because of violent collision, will cause the thread electrode hole and joint damage.
8. Use the torque wrench to reserve the electrode until the ends of the two electrodes are in close contact (the gap between the electrode and the joint is less than 0.05mm).

 

 

 


Product detail pictures:

One of Hottest for Gouging Rod 8mm - Manufacturer Supply High Quality RP HP Shp UHP Graphite Electrode for Arc Furnace 8 Inch – 28 Inch – Juchun detail pictures

One of Hottest for Gouging Rod 8mm - Manufacturer Supply High Quality RP HP Shp UHP Graphite Electrode for Arc Furnace 8 Inch – 28 Inch – Juchun detail pictures


Related Product Guide:

To continuously increase the administration process by virtue of the rule of "sincerely, good religion and excellent are the base of company development", we commonly absorb the essence of linked goods internationally, and continually build new solutions to fulfill the requires of shoppers for One of Hottest for Gouging Rod 8mm - Manufacturer Supply High Quality RP HP Shp UHP Graphite Electrode for Arc Furnace 8 Inch – 28 Inch – Juchun , The product will supply to all over the world, such as: Madrid, Dominica, Puerto Rico, Although continuous opportunity, we have now developed serious a friendly relationship with many oversea merchants, such as ones through Virginia. We securely assume that the merchandise regarding t shirt printer machine is often good through a great number of having its good quality and also cost.
  • Good quality, reasonable prices, rich variety and perfect after-sales service, it's nice!
    5 Stars By Susan from Orlando - 2017.09.29 11:19
    The factory has advanced equipment, experienced staffs and good management level, so product quality had assurance, this cooperation is very relaxed and happy!
    5 Stars By Astrid from Mauritius - 2017.11.11 11:41
    Write your message here and send it to us

    Main applications

    The main methods of using Tecnofil wire are given below

    Certificate

    products

    team

    honor

    Service